BrocadeG-port

在Brocade光纤交换机中，DomainID默认值为1，可以通过管理端口登录到交换机管理页面，点击“SwitchAdmin”，然后修改 ...,Hi,myproblemswithmyswitchesbrocade8GbPorts:8,9,10,11TheportsarethestatusG-Port,HowcanichangetheG-PorttoF-Port???,BrocadeFCswitch.Answer.AG-port.Isonethathasnegotiatedasagenericoruniversalport.CanbeusedaseitheranF-portorE-portbut ...,UnabletoconfigureBrocadeportasEpotasitisstuckasGpor...

參考資訊如下
光纤交换机的端口状态的G-Port 、L-Port 、F-Port 转载

在Brocade 光纤交换机中， Domain ID 默认值为1，可以通过管理端口登录到交换机管理页面，点击“Switch Admin”，然后修改 ...

Problems G-Port

Hi, my problems with my switches brocade 8Gb Ports: 8,9,10,11 The ports are the status G-Port, How can i change the G-Port to F-Port ???

What is a G-port in Fiber Channel (FC)

Brocade FC switch. Answer. A G-port. Is one that has negotiated as a generic or universal port. Can be used as either an F-port or E-port but ...

Brocade port is stuck as G port

Unable to configure Brocade port as E pot as it is stuck as G port. Replacing SFP and cable did not resolve; hareboot has not helped.

portCfgEport

Use this command to enable or disable E_Port capability on a port or to lock down a port as an E_Port. E_Port capability is enabled by default.

portCfgGE

Use this command to manage the port configuration of the GbE/10GbE ports. This command switches the port speed between 1G and 10G or switch the auto-negotiate ...

如何在Connectrix Brocade B 系列交換器上執行基本執行狀況檢查

(Trunk port, master is port #x) - 連接埠設定為中繼連接埠；主連接埠是連接埠#x ... (g) 為單位顯示錯誤計數器. 錯誤總數為上次在交換器上清除統計資料 ...

Brocade交换机端口类型

Brocade交换机上面看到的G-Port和U-Port是交换机端口在初始化过程中的两个中间状态，决定了这个端口初始化类型，是可以配置的。 U-Port就是交换机没有接 ...

QLogic link to Brocade Switch fails, stuck in G-Port

A defect was identified in QLogic firmware that causes the locked G-Port issue on Brocade switches. It was fixed in QLogic firmware 05.03.04 and ...